ExpressLRS packet rate chart and range calculator
Every ExpressLRS packet rate with its sensitivity, and how far a setup can reach.
Range estimate
Stock dipoles and receiver antennas are about 2 dBi; directional patch antennas on the radio are 6 to 13 dBi. The margin covers what free space ignores: the ground, trees, your body, antenna angles. 15 to 20 dB is a sensible start.
Realistic estimate
3.9 km
Free space with a 20 dB margin, line of sight.
Free-space limit
39 km
Perfect line of sight, nothing in the way, the signal right at the sensitivity limit. Real flights never get here.
Every 6 dB doubles or halves the range: four times the power (100 to 500 mW is 7 dB) roughly doubles it. Behind a hill or a building, line-of-sight maths stops applying.
ExpressLRS 4.x packet rate chart
| RFMD | Band | Lua name | Packet rate | Modulation | Sensitivity limit |
|---|---|---|---|---|---|
| 0 | 900 MHz | 25Hz | 25 Hz | LoRa | -123 dBm |
| 1 | 900 MHz | 50Hz | 50 Hz | LoRa | -120 dBm |
| 2 | 900 MHz | 100Hz | 100 Hz | LoRa | -117 dBm |
| 3 | 900 MHz | 100Hz Full | 100 Hz | LoRa, 8/12/16 ch | -112 dBm |
| 5 | 900 MHz | 200Hz | 200 Hz | LoRa | -112 dBm |
| 6 | 900 MHz | 200Hz Full | 200 Hz | LoRa, 8/12/16 ch | -111 dBm |
| 7 | 900 MHz | 250Hz | 250 Hz | LoRa | -111 dBm |
| 10 | 900 MHz | D50 | 50 Hz | LoRa, DVDA | -112 dBm |
| 11 | 900 MHz | K1000 Full | 1000 Hz | FSK, 8/12/16 ch | -101 dBm |
| 21 | 2.4 GHz | 50Hz | 50 Hz | LoRa | -115 dBm |
| 23 | 2.4 GHz | 100Hz Full | 100 Hz | LoRa, 8/12/16 ch | -112 dBm |
| 24 | 2.4 GHz | 150Hz | 150 Hz | LoRa | -112 dBm |
| 27 | 2.4 GHz | 250Hz | 250 Hz | LoRa | -108 dBm |
| 28 | 2.4 GHz | 333Hz Full | 333 Hz | LoRa, 8/12/16 ch | -105 dBm |
| 29 | 2.4 GHz | 500Hz | 500 Hz | LoRa | -105 dBm |
| 30 | 2.4 GHz | D250 | 250 Hz | FLRC, DVDA | -104 dBm |
| 31 | 2.4 GHz | D500 | 500 Hz | FLRC, DVDA | -104 dBm |
| 32 | 2.4 GHz | F500 | 500 Hz | FLRC | -104 dBm |
| 33 | 2.4 GHz | F1000 | 1000 Hz | FLRC | -104 dBm |
| 34 | 2.4 GHz | DK250 | 250 Hz | FSK, DVDA | -103 dBm |
| 35 | 2.4 GHz | DK500 | 500 Hz | FSK, DVDA | -103 dBm |
| 36 | 2.4 GHz | K1000 | 1000 Hz | FSK | -103 dBm |
| 100 | X-Band | 100Hz Full | 100 Hz | LoRa dual band, 8/12/16 ch | -112 dBm |
| 101 | X-Band | 150Hz | 150 Hz | LoRa dual band | -112 dBm |
RFMD is the number your OSD shows before the link quality (7:100 on 3.x is 250 Hz at 100%). Lower sensitivity (more negative) reaches further. Source: ExpressLRS, Signal Health.
ExpressLRS 3.x packet rates
| RFMD | Lua name | Packet rate | Sensitivity limit |
|---|---|---|---|
| 19 | K1000 Full | 1000 Hz | -101 dBm |
| 16 | DK500 | 500 Hz | -101 dBm |
| 14 | D50 | 50 Hz | -112 dBm |
| 13 | F1000 | 1000 Hz | -104 dBm |
| 12 | F500 | 500 Hz | -104 dBm |
| 11 | D500 | 500 Hz | -104 dBm |
| 10 | D250 | 250 Hz | -104 dBm |
| 9 | 500Hz | 500 Hz | -105 dBm |
| 8 | 333Hz Full | 333 Hz | -105 dBm |
| 7 | 250Hz | 250 Hz | -108 dBm |
| 6 | 200Hz | 200 Hz | -112 dBm |
| 5 | 150Hz | 150 Hz | -112 dBm |
| 4 | 100Hz Full | 100 Hz | -112 dBm |
| 3 | 100Hz | 100 Hz | -117 dBm |
| 2 | 50Hz | 50 Hz | -120 dBm (900) / -115 dBm (2.4) |
| 1 | 25Hz | 25 Hz | -123 dBm |
Questions
- Which ExpressLRS packet rate should I use?
- For freestyle and most flying, 250 Hz on 2.4 GHz is a good balance of range and response. Racers close in use 500 Hz or the 1000 Hz modes. For long range, drop to 100 or 50 Hz, or use 900 MHz, which reaches further at every rate.
- What does the sensitivity limit mean?
- The weakest signal the receiver can still decode at that packet rate, in dBm. Set your OSD's RSSI dBm warning 5 to 10 dB above it: for 250 Hz (−108 dBm) that's −103 to −98.
- How far can ExpressLRS go?
- ExpressLRS says 2.4 GHz at 250 Hz and 100 mW has gone over 40 km on ordinary omni antennas with clear line of sight. Your range depends on the terrain, obstacles and antennas, which is what the margin in the calculator stands for.
- What does the number on my OSD mean, like 7:100?
- The first number is the RF mode index (RFMD) from the tables here, the second the link quality in percent. On ExpressLRS 3.x, 7 is 250 Hz.
Free, in your browser
Fly it before you fly it for real
The FPV Grind sim runs in the browser with a gamepad, a radio or the keyboard. No download, no account.
Open the simMore free tools
- Betaflight diffPaste diff all to see every changed setting explained, with warnings, or compare two diffs side by side.
- Arming flagsTick the arming disable flags Betaflight shows, or paste CLI status, to see what each means and how to fix it.
- Wiring helperWhich UART each add-on goes on, how to wire it, and the Betaflight Ports settings and CLI lines.
- Latency and FOVHDZero, DJI and Walksnail latency and goggle field of view, from each maker's own specs.
- FPV spotsPlaces to fly near you, added by pilots and groups, and the groups that fly them.
- Rates calculatorDraw Betaflight, Actual, Quick, KISS and Raceflight rates, compare two sets, convert between types and fly them in the sim.